I have a clogged mixing tube am just wondering the best way to un clog it , i have tried just water with no abrasive and still doesnt seem to be working.
TFabian said
Feb 16, 2012
I know this sounds odd, but let it dry out overnight, and then mount it into the cutting head backwards. Shoot is a couple times to see if you can get it unclogged. This usually works, but if it doesn't...you're out of options.
Good Luck, Tim
DAF said
Feb 16, 2012
You can also take a drill bit that is samll enough in diameter to fit into the tube and gently twist it till the abasive loosens up. I have also ran the mixing tube backwards in the machine and gave it a cpl of shots and that unclogged the tube too.
bmf said
Feb 23, 2012
Thanks , putting the tube in backwards and shooting worked . Now i dont have to explain to my boss why he has to bye a new one .
I have a clogged mixing tube am just wondering the best way to un clog it , i have tried just water with no abrasive and still doesnt seem to be working.
I know this sounds odd, but let it dry out overnight, and then mount it into the cutting head backwards. Shoot is a couple times to see if you can get it unclogged. This usually works, but if it doesn't...you're out of options.
Good Luck,
Tim