At what cut speed would I have to run a Flow DWJ/ 60K intensifer at to cut 5/8 thick Al2003 Stainless steel (Machinabilty index 3.19?) to get an edge quality of 250Ra?
TFabian said
Jul 23, 2011
You should be able to achieve that with a 40% edge, you might want to move to a 120 mesh abrasive also. A fine mesh at 20% can get you around 75-100.
At what cut speed would I have to run a Flow DWJ/ 60K intensifer at to cut 5/8 thick Al2003 Stainless steel (Machinabilty index 3.19?) to get an edge quality of 250Ra?
You should be able to achieve that with a 40% edge, you might want to move to a 120 mesh abrasive also. A fine mesh at 20% can get you around 75-100.